Model progression
2000 - 2002
The factory RFS (Racing Four Stroke) KTM 400 EXC won the 1999 World Enduro Championship. The 2000 RFS KTM 400 EXC had a right side kickstarter but also had the E-start button. KTM took a different approach to the configuration of the motor than most other manufacturers. While others used a 90mm-plus bore piston with a very short stroke of 60mm, the KTM RFS motor used an 89mm x 64mm boiconfiguration which provided more torque at the expense of higher RPM's.2003
This was the first year of the 450 EXC model. It evolved from the earlier 400 EXC model, with an increased displacement via a longer stroke.2005-2007
These years saw a new frame. Improving the handling without major changes. Rear body work changed to the single piece design off the SX model. The 2006 450 EXC made and 37.5 ft-lbs. torque.2007
This was the first year that the 450 EXC was offered in full factory 50-state street legal trim. The conversion of the previously available model required changes in gearing, exhaust, DOT approved tires and lights and the addition of turn signals, and a horn. Other than these changes the bike was virtually the same as the previously off-road only bike. The US off-road only version of the EXC was replaced by the XC (2008 - 2009
As of 2008 the US version of the 450 EXC continued to be sold in street legal trim but was replaced by the off-road only 450 XC or 450 XC-W in the US market. A new chassis was introduced in 2008 with improvements in suspension and handling. The RFS motor available in 250 cc, 400 cc, 450 cc and 510 cc models between 2000 and 2007 was replaced with the XC4 motor beginning with the 2008 model year. The XC4 450's have more power; with a 95 mm x 63.4 mm bore and stroke producing about . Reliability may have gone down; some people experience top-end issues with the new engine, while others run without incident. 2008 models had oil migration issues(fixed on 2009 models).2010 - 2012
Offered as the Champions Edition in 2010. New features include new front Brembo brake caliper, PDS needle design, frame welded to steering head 10mm lower, reinforced gearbox (1,2,5,6 idler gears), reworked chain adjuster & clamping rail, better tension on timing chain (noise reduction). Oil pump gears, shaft, cover and o-ring also updated on 2011 models.2012 - 2016
For 2012, new features include EFI Fuel-injection, a diaphragm spring clutch and a lighter battery. The XC(W) and XC(F) models both have a plug on the right side of the engine case where a kick start lever can be added.2017 - Present
For 2017, KTM redesigned the 450 from the ground up. A new chassis, motor, ergos, and WP XPlor 48MM forks and PDS shock. They achieved a weight reduction of 5 kg from 2016. The seat height was lowered by 10mm to 38 inches and the foot pegs raised by 6mm for better ground clearance.References
External links